|
How
to do it ?
1
Thicken Foamcoat
with sand.
2 Mask
grout areas with ¼" tape.
3 Apply
skim coat of Foamcoat mixture to ¼" substrate.
4 Let
dry thoroughly.
5
Apply second skim
coat over first.
6 Let
set.
7 Pull
tape.
8 Let
dry thoroughly.
9 Tint
Foamcoat mixture with terra cotta-esque color.
10 Lay
in tinted Foamcoat mixture in selected areas.
11
Knock down texture
in selected areas.
12
Apply light glaze
on light tiles.
13 Apply
dark glaze on light tiles, allow to fall into low spots.
14
Wipe off dark glaze
from high spots.
15
Mix dark umber
glaze, apply to red tiles, wipe off high spots.
16
Mix terra cotta
glaze, apply to selected tiles.
17
Tint Foamcoat mix
to "concrete" grey.
18
Apply selectively
to joint areas and as skim to select tiles.
19 Apply
dark glazes as distress where indicated.
|
