Rosco US : Power Supply Units

Products For Lighting

Products For Film, TV & Still Photo Production

Products For Fog

Products For Scenic Applications

Flooring Products

All Products

Rosco Power Supply Units

Downloads:
Download the PSU Spec Sheet (36kB) pdf file
Download the PSU manual (176kB) pdf file

Compatible Effect Accessories:

Rosco I-Cue
Rosco DMX Indexing Rotator AC
Lighting/Apollo Chroma Q Broadway
AC Lighting/Apollo Chroma Q M1, 2, 5, 8
Apollo Roto-Q
City Theatrical DMX Iris
DHA Twin DMX
Rainbow 6", 8", 12" Pro Colour Scroller
Rainbow 15" Pro Colour Scroller
Wybron Forerunner
Wybron Lightwave

The New Idea In Power Supplies
For Scrollers and Rotators

Costs far less than other brands

Compatible with most scrollers and rotators currently used

Power all our devices with a 200 watt or 400 watt PSU

Rosco's new power supplies are compatible with nearly all the color scrollers, gobo rotators and other accessory devices in common use. Most models of Wybron, Rainbow, AC Lighting or Apollo scrollers can be powered by the Rosco PSUs. In addition, the Rosco power supply units will support Rosco and Apollo rotators, the City Theatrical DMX Iris and Rosco I-Cue Intelligent Mirrors and Indexing Rotators.

The range consists of two different power supplies, specified by the amount of load they carry. The most powerful device, PSU-400, will provide a constant load of 400 watts (non constant load of at least 500 watts). It can thus provide power to any combination of scrollers, rotators or other devices requiring 400 watts of power. Until now, each brand of scroller or rotator required a separate power supply, often powering only a limited number of units. Each Rosco power supply unit is labeled with a compatibility chart, showing all the brands and models which can be powered, along with their power requirements listed in watts consumed.

PSU-400 is a 19" rack mount module, equipped with four XLR outputs and four returns.

The PSU-200 also has four outputs and four returns. It can be pipe mounted with a C-Clamp or other hanging device.

A number of features set these Rosco power supply units apart. Most notable of these features is the fan cooling system. Power supplies all share the common problem of shutting down when they are overheated and then coming back on when they are sufficiently cooled down. The Rosco PSU-400 includes a triple fan cooling system to allow continuos service through the show, without fear of interruption.

These new Rosco power supplies are RDM Upgradeable (pending the completion on the RDM specification) and have been engineered to be compatible with the emerging standard for Remote Device Management.

Perhaps the best news of all about the new power supplies is their low price. They are priced well below other brands and they can be used interchangeably for virtually all the scrollers, rotators and other lighting equipment accessories in your inventory.

PSU-400W

PSU-200W

Power Specifications:

PSU-400

400W for constant load, 500W for
non-constant loads
5.6A @ 115 V, 2.8A @ 230V
19" rack mount style
Auto sensing for 100, 120 and 240 volts
DMX pass-through
Four XLR outputs
Four XLR returns
Overload protection on Power Supply
(auto recovery)
Triple fan cooled
Onboard Termination switch

PSU-200

2.8A @ 115 V, 1.4A @ 230V
Pipe mountable with C-clamp
Auto sensing for 100, 120 and 240 volts
DMX pass-through
Four XLR outputs
Four XLR returns
Overload protection on Power Supply
(auto recovery)
Single fan cooled
Onboard Termination switch

PSU-50

CE and UL listed
50 watt Power Supply
Input - 100, 120, 240 volt operation
(auto sensing) Edison Connector
Output - 24V at 1.66A
4 Pin XLR Female connector
DMX male connector
Power LED on board

Shipping Information
When this product is shipped,
the dimensions of the container are:
PSU-50:
10"W x 4.5"L x 5"H, 1.5lbs.
(25.4cm W x 11.43cm L x 12.7cm H, 1 kilo)

PSU-200:
20.6"W x 16"L x 6.6"H, 9lbs.
(52.32cm W x 40.64cm L x 16.76cm H, 4 kilos)

PSU-400:
20.6"W x 16"L x 6.6"H, 14lbs.
(52.32cm W x 40.64cm L x 16.76cm H, 6 kilos)

Specifications & Accessories
#205 71402 0400	PSU-400
#205 71402 0200	PSU-200
#205 71402 0050	PSU-50

If you have a question about Rosco Power Supply Units, please email motioneffects@rosco.com