|
|
The PF-1000 Remote Head Fogger is essentially a fog machine taken out of its box and reassembled to meet special
design needs. It is designed for remote, precise applications where the use of a standard fog machine is not
practical.
The system consists of a Heat Exchanger Module that is separate from the Control Module and attached with tubing
and a special cable. The Heat Exchanger Module is approximately 9 in. (22.9 cm) long and 3 in. (7.5 cm) in diameter.
This small size allows it to be affixed in many places a standard fog machine could not be used, such as in props
and animated mannequins. The Control Module can be mounted on a wall or placed anywhere remote to the Heat Exchanger
Module and fluid reservoir.
The Control Module controls fog volume and on/off operation. Regulated compressed air can be introduced through the
heat exchanger to add to the creation of punctuated effects, as well as help keep the Heat Exchanger Module clean.
This can be regulated with the Air Input Kit. It can also be modified to allow
activation through a lighting control board or a main control computer. A 15 ft. (4.6 m) Head Cable links the Heat
Exchanger Module with the Control Module. This cable carries power and the data line for the thermal sensing device.
A 15 ft. (4.6 m) long, 1/8 nylon tube carries fog fluid from the reservoir through the Control Module to the Heat
Exchanger Module. The system uses all standard Rosco Fog Fluids.
The Delta 3000, Model 1600, Alpha 900 and the PF-1000 have been tested for use in professional theatrical productions
and are included under the Equipment-Based Guidelines of the Equity-League Pension and Health Trust Funds.
Click here to go to download.
|
