Downloads:
X24-Effects Spec Sheet

This truly amazing projector provides large scale rippling light effects previously unavailable to lighting designers. The device utilizes a 200 watt Enhanced Metal Arc source, whose short arc allows for an output of 5K lumens, with a 7000 hour lamp life. The color temperature is similar to a Xenon source at 6000K.

The effect itself is created by rotating two "X" size glass gobos off center of the optical path. This results in a projection that does not appear to have a visible direction or pattern. The color slot will accept dichroic color filters.

Lens trains are available in 30, 50 and 70-degree configurations. Due to the efficiency of the lamp and the design of the optics, all lenses have crisp edges, even for long throws of 100 feet or more.

The X24 X-Effects Projector is available in two configurations. For theatrical entertainment lighting, specify the model with DMX on board. Using five DMX channels, the unit has full control of each effect gobo, lamp strike and light output. The DMX-controlled douser, also initiated through your lighting control board, directs not only the light output but blackouts and fades as well.

For such permanent installations as retail or museum display, or where DMX is not required, the analog X24 X-Effects Projector is a good choice. It includes onboard potentiometers to control the speed and direction of both gobos.

Please note that the X24 parts are NOT interchangeable with the previous generations of X-Effects. Part numbers for the complete projector and common replacement parts are listed below. While it is recommended that any effects glass from previous X-Effects units be replaced with X24 effects glass, those older glass wheels can be used with some success. Irregular motion may occasionally be detected with older effects glass disks.

Q. Does Rosco offer a free upgrade to the X24 unit?
A. No, the X24 is the next generation of the X-Effects. We are offering the Front Module upgrade option as a courtesy to owners of previous X-Effects. Please contact Rosco for details on how to upgrade.

Q. Do I have to upgrade to the X24?
A. No, the previous X-Effects is still completely supported by Rosco and we will continue to offer parts and service as needed. Only upgrade if you want the 24/7 reliability offered by the X24.

Q. Will my existing inventory of spare lamps work in an X24 unit?
A. yes, the X24 is designed to use the SMR202 lamp, but can also use the previous SMR201, though the SMR201 only offers 2500-3000 hours of lamp life.

Q. Can I use my existing inventory of effects glass disks with the X24
A. Yes, and No. The X24 is designed to use an effects bezel that is thicker than original X-Effects bezels. The original thinner design can work, but there is the possibility of slipping creating a "jumping" motion. We recommend that you get X24 Effects glass instead.

Q. I want to buy an original X-Effects, is it available?
A. No, the X24 X-Effects is the only model currently available for sale from Rosco.

Q. I just bought an X-Effects, how do I know if it's the X24 or not?
A. The X-24 units have a distinctive label clearly marking them as X-24 units.