|
|
Lay-in Brushes
Download PDF Spec Sheet (24.1 KB)
Rosco Lay-In Brushes have been carefully designed and manufactured to meet the demands of scenic artists
everywhere. Meticulous attention to all the components – bristles, ferrules (the metal band that holds
the bristles) and handles, have produced a series of brushes that, with routine maintenance, will provide
excellent service for years.
They are available in ferrule widths of 4", 5", 6" and 7". The bristles are all made of soft, natural hog
hair to allow you to paint a clear line without marks or scratches. There is an extraordinary number of
bristles packed into each brush’s ferrule to permit a full charge of paint on each and every dip into the
paint bucket. The bristles are also somewhat longer than those found in commercial brushes to prevent paint
from penetrating the ferrules.
The ferrules are all manufactured in stainless steel to prevent rusting and are coated for extra protection.
All the handles are high quality hardwood, carefully varnished for durability. The 4", 5" and 6" wide brushes
are equipped with removable handles, so you can easily switch to the longer handles for painting on the floor.
Handles: 5.5" long
Bristles: 3.5" long
Ferrules: 4", 5", 6" or 7" x 1.5" x 1.5"
 |
| Product Numbers |
| No. 155 05630 0400 |
4" Lay-In Brush |
| No. 155 05630 0500 |
5" Lay-In Brush |
| No. 155 05630 0600 |
6" Lay-In Brush |
| No. 155 05630 0700 |
7" Lay-In Brush |
|
|
All technical data, recommendations and service are accurate to the best of our knowledge.
Rosco assumes no responsibility for the results obtained or damage incurred from use by
the buyer in whole or in part since method of application and its use is beyond our control.
If you have a question about Rosco Scenic Paint, please email
scenepaint@rosco.com
Products
|
Tech Info
|
Where To Buy
|
Contact Us
|
Search
© Rosco Laboratories 1998-2008
|
