Products
Products For Lighting
Products For Film, TV & Still Photo Production
Products For Fog
Products For Scenic Applications
Dance Floor Products
All Products
Tech Info Where to Buy Contact Us  
   
   

/products/fog

DMX Interface

DMX Interface The Rosco DMX Interface has been designed to control most of the range of standard Rosco fog machines through the industry standard DMX lighting control consoles. The interface will allow a preset volume control of the 4500 and the PF-1000 Remote Head Fogger (not all indicator lights will function) and the older Model 1500.

The DMX Interface draws its power directly from the fog machine in the same manner as the Standard Remote or Super Remote. Connection to the machine is made via a 7 pin XLR type connector that is attached to the unit and is plugged in to the same input on the machine as any of the standard control accessories.

The unit is addressable to any DMX channel via (8 way) dip switch settings using the binary code system. There is a second set of dip switches (5 way) that can be used to preset the machine output.

Product Specifications
#51680 0000 DMX Interface
The DMX Interface accepts standard 5-pin XLR DMX connectors.

Dimensions: 7" x 1.75" x 3.25" (18 cm x 4.5 cm x 8.2 cm).



ROSCO DMX FOG INTERFACE
This interface is designed to receive a DMX data stream and control one connected fog machine. The interface plugs into the remote connector on the fog machine. The interface has a DMX in and out connector, to allow daisy chaining.

Setup:
  • Make sure the fog machine is turned off.
  • Plug the interface into the fog machine, and the DMX cable(s) into the interface.
  • Set the address using switches 1 - 9.
  • Set the mode using switches 1 - 5.
  • Power up the fog machine, switch it to remote operation, and wait for it to warm up.


  • Operation:
  • The red H LED is the heater is on indicator.
  • The green 'R' LED is the ready indicator.
  • The 'C' LED will indicate the operating mode and comm status of the interface.
    • Off: Blown fuse or no power is present.
    • Blinking Red or Blinking Red / Green: The interface is in hard reset mode - possible power problem or IC failure. Contact Rosco.
    • Solid Red: The interface is working, but no CMX comm is present.
    • Solid Green: The interface is OK, CMX comm is present, but no output is active.
    • Flashing Green: The interface OK, and the fog machine output is on. As the DMX signal increases, the LE will flash faster. If CMX comm is interrupted for more than 3 seconds, the outputs will automatically turn off.


    SWITCHES:
    Mode SW 1 SW 2 SW 3 SW 4 SW 5
    Normal         Off
    Fixed 10% Off Off Off Off On
    Fixed 30% Off On Off Off On
    Fixed 50% Off Off Off On On
    Fixed 80% Off Off On Off On
    Fixed 100% On On On On On



    Address SW 7 SW 8 SW 9
    001 - 064 (Add 0) Off Off Off
    065 - 128 (Add 64) On Off Off
    129 - 192 (Add 128) Off On Off
    193 - 256 (Add 192) On On Off
    257 - 320 (Add 256) Off Off On
    321 - 384 (Add 320) On Off On
    385 - 448 (Add 384) Off On On
    449 - 512 (Add 448) On On On



    Address SW 1 SW 2 SW 3 SW 4 SW 5 SW 6
    1 Off Off Off Off Off Off
    2 On Off Off Off Off Off
    3 Off On Off Off Off Off
    4 On On Off Off Off Off
    5 Off Off On Off Off Off
    6 On Off On Off Off Off
    7 Off On On Off Off Off
    8 On On On Off Off Off
    9 Off Off Off On Off Off
    10 On Off Off On Off Off
    11 Off On Off On Off Off
    12 On On Off On Off Off
    13 Off Off On On Off Off
    14 On Off On On Off Off
    15 Off On On On Off Off
    16 On On On On Off Off
    17 Off Off Off Off On Off
    18 On Off Off Off On Off
    19 Off On Off Off On Off
    20 On On Off Off On Off
    21 Off Off On Off On Off
    22 On Off On Off On Off
    23 Off On On Off On Off
    24 On On On Off On Off
    25 Off Off Off On On Off
    26 On Off Off On On Off
    27 Off On Off On On Off
    28 On On Off On On Off
    29 Off Off On On On Off
    30 On Off On On On Off
    31 Off On On On On Off
    32 On On On On On Off
    33 Off Off Off Off Off On
    34 On Off Off Off Off On
    35 Off On Off Off Off On
    36 On On Off Off Off On
    37 Off Off On Off Off On
    38 On Off On Off Off On
    39 Off On On Off Off On
    40 On On On Off Off On
    41 Off Off Off On Off On
    42 On Off Off On Off On
    43 Off On Off On Off On
    44 On On Off On Off On
    45 Off Off On On Off On
    46 On Off On On Off On
    47 Off On On On Off On
    48 On On On On Off On
    49 Off Off Off Off On On
    50 On Off Off Off On On
    51 Off On Off Off On On
    52 On On Off Off On On
    53 Off Off On Off On On
    54 On Off On Off On On
    55 Off On On Off On On
    56 On On On Off On On
    57 Off Off Off On On On
    58 On Off Off On On On
    59 Off On Off On On On
    60 On On Off On On On
    61 Off Off On On On On
    62 On Off On On On On
    63 Off On On On On On
    64 On On On On On On



  • If you have a question about Rosco Fog products, please email fog@rosco.com


    Products | Tech Info | Where To Buy | Contact Us | Search


    © Rosco Laboratories 1998-2008