|
|
CystalGel
Download the CrystalGel Spec Sheet (20.5 KB) pdf file
See some sample applications
|
|
CrystalGel is a non-toxic, water-based material which provides a clear, plastic-like coating
on virtually any surface used in modern stagecraft. It air dries quickly - usually within
hours - to a flexible, translucent surface. When dry, it can be painted with any Rosco scenic
paint, or carved, or safely rolled without cracking, peeling, or sticking. Such products as
sand, sawdust or powdered clay can be added to it to create unique textures.
CrystalGel is a styrene resin, providing the greatest adhesion power of any non-oil based
product. Among the soft surfaces to which CrystalGel will adhere are styrofoam, ethafoam
and, of course, muslin and fabrics. Among the more rigid surfaces to which CrystalGel will
adhere are metals, glass, plastics, wood, Luan and fiberboard. It is particularly effective
in adhering to plexiglass without hardening off.
DRYING TIME:
Varies with thickness of coating, but usually dries to the touch between one and eight hours.
Allow 24 hours for complete cure.
COVERAGE:
Varies with application method; approximately 250 square feet per gallon.
CLEAN UP:
Easy clean up with soap and water. Be sure to clean before CrystalGel completely dries. Once
dried, clean up is more difficult.
APPLICATION:
Apply by brush, roller, pastry tube, trowel, tongue depressor or any other convenient means.
CrystalGel has the consistency of hair gel. It may be thinned with water for a more liquid
consistency.
SURFACE PREPARATION:
All surfaces should be clean, dry and dust-free before application.
SHELF LIFE:
Minimum 12 months
CAUTIONS:
Do not apply when surface or air temperature is below 50º F (10º C). Protect unused product
against freezing. CrystalGel will freeze and become unusable at temperatures below 32º F (0º C).
Do not take internally. Use with adequate ventilation. Keep out of the reach of children.
|
Specifications
|
|
#150 07400 0128
|
Gallon;
|
|
#150 07400 0640
|
5 Gallon
|
|
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco
assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole
or in part since method of application and its use is beyond our control.
SAMPLE APPLICATIONS:
You can apply CrystalGel to a 2 x 4 with a tool as simple as a plastic spoon. The material will
hold an edge without melting.
|
CrystalGel will adhere to a number of materials used in stagecraft. Some examples, show here, are upholstery foam,
polystyrene, pine, aluminum, ethafoam road and steel.
|
Many scenic artists will use a cake decorating tool for applying CrystalGel. It's shown here being
applied to aluminum.
|
You can use a pastry tube to apply CrystalGel, specially when using it as an adhesive for attaching beading.
You can add dye to CrystalGel to create decorative details. That is also most easily accomplished with
a pastry tube.
|
We used a chip brush to apply CrystalGel to plexiglass. We added leather dye to the CrystalGel to help
create a stained glass or textured glass effect.
|
If you have a question about Rosco Scenic Paint, please email
scenepaint@rosco.com
Products
|
Tech Info
|
Where To Buy
|
Contact Us
|
Search
© Rosco Laboratories 1998-2008
|
